Selective pallet racking, engineered to your load chart
The workhorse system: 100% pallet selectivity, adjustable levels and load ratings from 500 kg to 5,000 kg per beam pair.
Direct access to every pallet, every time
Selective pallet racking gives a forklift direct access to each pallet position, which makes it the right default for operations with a wide SKU mix and fast-moving stock. Uprights are roll-formed from high-tensile steel with a 75 mm slot pitch; box-section beams lock in with safety clips so levels can be repositioned without tools.
We size the system around your pallet — weight, footprint, overhang and stack height — then check it against your building’s clear height, sprinkler layout and MHE turning radius before quoting.
- 100% selectivity — no double handling
- Beam levels adjustable on a 75 mm pitch
- Bolt-free beam-to-upright connection with safety locks
- Load ratings from 500 kg to 5,000 kg per level
- Heights to 12 m; single, double and back-to-back runs
- Column guards, row-end barriers and pallet-support bars
- Powder-coated or galvanised finish options
- Supplied with layout drawings and load-notice plates
Technical specification
Indicative ranges — final sizing is confirmed against your pallet data and building drawings.
| Type | Selective pallet racking (single & double deep) |
|---|---|
| Load per level | 500 kg – 5,000 kg per beam pair (UDL) |
| Upright height | 2,000 mm – 12,000 mm |
| Upright section | 70 / 90 / 120 mm, 1.6–2.5 mm thickness |
| Beam section | Box beam, 80 / 100 / 120 / 140 mm |
| Beam pitch | 75 mm adjustable slot pitch |
| Bay width | 1,800 mm – 3,600 mm (pallet dependent) |
| Frame depth | 600 mm – 1,200 mm |
| Finish | Powder coated, 60–80 micron DFT (galvanised optional) |
| Standard colours | Peace Red uprights / grey beams, or as specified |
| Accessories | Column guards, row-end barriers, pallet supports, mesh decks, safety pins |
| Documentation | Layout drawing, load chart, load-notice plate, test certificates |
Where pallet racking earns its keep
Questions we get asked before every order
We start from your heaviest pallet, add a safety factor, and confirm the beam and upright sections against that. The rated UDL is then stamped on a load-notice plate fixed to every run, so the floor team always knows the limit.
Standard systems in stock sections are dispatched in 2–3 weeks from drawing approval. Non-standard heights, galvanised finishes or large phased projects typically run 4–6 weeks.
Yes. Our own erection crews mark out, erect, plumb and anchor the system, then hand over a signed checklist with anchor torque values and the load chart.
That’s the point of the system. Beam levels move on a 75 mm pitch, and we keep standard sections in stock so you can add bays or change levels years later.
Every project ships with a layout drawing, load calculations, material test certificates and the load-notice plate artwork — the usual audit pack.
We supply and install across India, with crews mobilised from Ludhiana. Export enquiries are handled case by case.
Get a pallet rack quote
Share your pallet weight, footprint and clear height — we’ll come back with a layout and a price.
Designing, manufacturing and installing heavy-duty pallet racking for warehouses, cold stores and distribution centres.