Cable trays for organised, accessible cable runs
Perforated, ladder and channel cable trays that keep power and data runs supported, ventilated and easy to modify.
Details
A cable tray does one job well: carry cable runs in a straight, supported, ventilated path instead of a tangle on conduit or the floor. We manufacture perforated tray, ladder tray and channel tray in the widths and finishes a panel builder or electrical contractor actually specifies.
Sections bolt together on site with standard couplers, bends and risers, so a run can follow the building rather than the building being built around the tray. Finish and load rating are matched to the environment — indoor panel rooms, outdoor runs, or corrosive process areas.
- Perforated, ladder and channel profiles
- Bolted coupling — no site welding
- Bends, tees, risers and reducers in the same range
- Load classes for light data cable through heavy power runs
- Galvanised or powder-coated finish
- Widths from 50 mm to 600 mm
Technical specification
Indicative ranges — final sizing is confirmed against your requirement and site drawings.
| Type | Perforated / ladder / channel cable tray |
|---|---|
| Width | 50 mm – 600 mm |
| Standard length | 2,500 mm / 3,000 mm sections |
| Material | CRCA sheet or hot-dip galvanised |
| Load class | Light (data) to heavy (power) duty |
| Coupling | Bolted plate/coupler joints |
| Accessories | Bends, tees, risers, reducers, covers |
| Finish | Galvanised (GI) or powder coated |
Where cable trays earn their keep
Questions we get asked before every order
Perforated suits general power and data runs with ventilation; ladder suits heavier power cable and longer spans; channel suits smaller single or few-cable runs. Tell us the cable count and span and we’ll recommend one.
Yes, the full accessory range — bends, tees, reducers and risers — is manufactured to match the tray profile and width.
Galvanised is the default for outdoor or corrosive areas; powder coating is used indoors where appearance matters and a specific colour is wanted.
Standard lengths are 2.5 m and 3 m; site cutting and coupling is straightforward with our bolted joint system.
Get a Cable Trays quote
Tell us your requirement and site details — we’ll come back with a layout and a price.
Designing, manufacturing and installing heavy-duty pallet racking for warehouses, cold stores and distribution centres.